|
Post by critter on Feb 16, 2016 13:53:34 GMT
Any Vehicle under allowed 108.5 wheelbase. NO Vans or full frame cars!!
1. Strip all glass and flammable material from vehicle. Dash may stay in car.
2. Gas tank may be moved to back seat but must be covered. If fuel tank is mounted in front of the rear axle, it may be left in factory position.
3. Doors may be welded but only two spots per seam 3x3 plate. Nothing on bottom or top of doors.
4. Trunk lid, hatch, or gate may only be wired shut in 6 places. 10 in hole in trunk lid for inspection.
5. Must run factory Drive Line.
6. Tires must be DOT, no paddle tires
7. No welding on frame ANYWHERE.
8. You must run factory bumper for your make and model, you may take the cover off. You may 9-wire bumper to body in 2 places, Front and back this will count as two of your 6 wire spots if you run through truck lid.
9. You may have a floating cage, no bigger that 3x3 and can not have any down legs. No gas tank protector.
10. Suspension must remain all stock for your make and model do not alter in any way. Must bounce, No welding shocks, NO raising or lowering of cars...
11. No body creasing, tucking, wedging or " V " the trunk.
12. Must have 9 wire in the front windshield.
13. Battery must be moved to the passenger floorboard.
14. All cars must have working brakes.
15. All air bags must be removed from car.
|
|
|
Post by Mike on Aug 3, 2017 22:10:08 GMT
Do same rules apply for 2017 on gut and go
|
|